I smoked the clutch in my Xterra at 41,000 miles. Anyone work for Nissan? I need to find out how much a new one is for a 2002 S/C SE 5-speed. I guess I shouldn't pop the damn clutch so much.

Psshhhh, easy money.

Check out:

www.courtesyparts.com

Really cheap stock Nissan parts

Ahhh memories... If it makes you feel better, I went through two 5 speed transmissions on my older Nissan pickup within 20k miles. It didnt like water puddles too much.

I've got a 93 Isuzu Amigo with 117000 miles on the original clutch. I guess some people like to ride the clutch when they drive.

I know a great mechanic on all Japaness model cars. Let me know if you need his contact info.

I guess thats why they say use the brakes to slow and stop the car. Brakes are cheaper to replace.

Parts you'll more than likely need is clutch plate, throw out bearing and resurface the fly wheel.

Was the clutch properly adjusted? Does the manual say more to adjust?

And you didn't blame Tony???

Dang Jim!! She has no idea how we beat that little box the way we did on that hunting trip! Great now its out in the open and i hope you are happy now!

Oh no, this ones all her. She loves ripping the tires into second and third.

Nobody would believe it Jimbo.

I'll take that number if you don't mind sharing

Thanks,

OK, dealer said $1300 because it is 4wd and there are some stinking torsion bars to deal with. Come on people help me out here.

Marlene,

Anne and I have had some work done at the Mighty on Weber right where it turns to Larkin. I'm not sure he'll do clutches, but it's worth a try. The guy works his but off there and has gone the extra mile for us more than once. His prices have been more than reasonable.

I called a friend of mine who works on my truck and the companies trucks, he doesn't do clutches. He said $1300 is not bad. His Camero costed $1500 to get it done

I got 184,000 on my Sonomas clutch and it still chirpped in 3 gears.D


But just think how much it would cost if you smoked an automatic tranny clutch pack.

2 yrs/41k miles.....and it's not under warranty anymore? eewwwwwwww!

Only cost 1800 for my Ram 1 ton...complete rebuild.

COmpared to $125 to replace teh clutch, pressure plate and t-bearing in my old ranger.D It cost my brother $60 for teh same with a chevette. We could change that out in 30 min.D

Ya but then you have to actually drive an old ranger or chevette.

YUK!!!!

3 year 36,000 mile warranty. clutches arent covered anyways.

i worked for nissan guam for 10 years. i emailed my old boss(a fellow sb rider) to see what kind of deal i could get you for the clutch disc, pressure plate and release bearing. don't know how urgent you need the vehicle but parts coming from guam would set you back about 14 days.

i've also got another scenario that may have led to your clutch failure. might be a possible warranty issue. you or gsxrtony can pm me for that.

Why dont you go ride your bike.





Oh you dont have one.