Here are pictures of my new bike with some minor cosmetic mods. Extreme Graphics undertail with intergrated rear turn signals, Carbon Fibre rear hugger, Front flushmounts, and Frame Sliderss.
Pictures of my new bike and mods.
GrandpaNot
1 - 11 of 11 Posts
Joined
·
262 Posts
Here are pictures of my new bike with some minor cosmetic mods. Extreme Graphics undertail with intergrated rear turn signals, Carbon Fibre rear hugger, Front flushmounts, and Frame Sliderss.
Joined
·
3,491 Posts
That's looks pretty fast, mind if I borrow it for the racetrack. I promise I'll bring it back in one piece. (just don't mind the duct tape holding it together in 1 piece):twofinger
Who Needs a Plate Light?
I don't have licence plate light either. my led's on the back light up the plate enough. So far I haven't had a problem with it. If it does become an issue I will find a way to rig one up.
the bikes look so much sweeter without one!!!!!
I don't have licence plate light either. my led's on the back light up the plate enough. So far I haven't had a problem with it. If it does become an issue I will find a way to rig one up.
the bikes look so much sweeter without one!!!!!
Joined
·
664 Posts
How come you bought all that POSER shit before doing any of the IMPORTANT things: full exhaust system-lose the SET valve, PC3r, dynotuning to make it run sharp, regearing, suspension mods, rider schools???
Kidding! :evil :evil :evil
Nice ride. :thumbsup
Kidding! :evil :evil :evil
Nice ride. :thumbsup
Joined
·
352 Posts
License light
You want a trick license light, Y2KR1? Check out this LED light from Libertek.
Mine came as a kit with the Diamond LED tail lights, but you can purchase it separate for about $50.
You can find them at http://www.graphicartmotodesign.com
This picture really doesn't show anything more than the size and placement of the light (the small black dot), but they actually give a nice bluesh light at night that illuminates the plate pretty well.
![Image]()
You want a trick license light, Y2KR1? Check out this LED light from Libertek.
Mine came as a kit with the Diamond LED tail lights, but you can purchase it separate for about $50.
You can find them at http://www.graphicartmotodesign.com
This picture really doesn't show anything more than the size and placement of the light (the small black dot), but they actually give a nice bluesh light at night that illuminates the plate pretty well.
Re: License light
Ill prob get 1 of those LED light pen's for 5$ at Target, and wire it in when I go to Rear LED''s....that Libertek is nice, but Damn...50$ for a single white LED?
I got the Dussalt tail, with the standard non-LED lights...they light up the plate nice becouse of a clear section at the bottom of the brake lights themselves.ricerocket said:You want a trick license light, Y2KR1? Check out this LED light from Libertek.
Mine came as a kit with the Diamond LED tail lights, but you can purchase it separate for about $50.
You can find them at http://www.graphicartmotodesign.com
This picture really doesn't show anything more than the size and placement of the light (the small black dot), but they actually give a nice bluesh light at night that illuminates the plate pretty well.
![Image]()
Ill prob get 1 of those LED light pen's for 5$ at Target, and wire it in when I go to Rear LED''s....that Libertek is nice, but Damn...50$ for a single white LED?
Joined
·
352 Posts
Yeah, $50 is a lot, espescially after you spend $200 on the diamonds. You have no choice but to bite the bullet....there's no license light otherwise. It is cool though.
I might look into one of those little license plate lights for my R6. $50 bucks isn't cheap but think of all of the money you put into your bike. Hell, I'd rather spend $50 bucks on my bike than most chicks I know! My bike always lets me go for a ride. :evil
"It takes a champion to ride one!"
"It takes a champion to ride one!"
Joined
·
262 Posts
Reply to sandman
Thought I would get used to the power that is there before upgrading. I just traded a Ninja 600 for this bike and still training on the power that this one has. But... those "non-poser" mods are coming... it's only a matter of time. I guess I just couldn't stand that truck fender that comes stock with the bike.:cheers
Thought I would get used to the power that is there before upgrading. I just traded a Ninja 600 for this bike and still training on the power that this one has. But... those "non-poser" mods are coming... it's only a matter of time. I guess I just couldn't stand that truck fender that comes stock with the bike.:cheers
1 - 11 of 11 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
