Chicagoland Sportbike Forums banner
1 - 1 of 1 Posts

·
long distance
Joined
·
383 Posts
Did you remove the main jets, emulsion tubes, pilot jets, and clean them to a nice shine? has a jet kit been installed? if not you might want to remove the factory plugs that block the air/ fuel mix, that needle needs to be clean, check the small o-rings in there(air/fuel needle) , they can be reused if in good shape, are you useing a stock air box? also sync when done. There is some good info at www.factorypro.com , just wanted to help:D
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top