Chicagoland Sportbike Forums banner

1 - 20 of 21 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter · #1 ·
for Yam R6:
frame sliders
clutch slider
swingarm sliders
bar sliders

any color
preferably not "pre-crashed" (i can do that myself :D )
pm me
 

·
CLSB SuperHero
Joined
·
1,808 Posts
A guy on the R1-forum made my frame, swingarm, and bar end sliders. I like the way they look. $71 for all of them shipped. Not to shabby. I can give you his info if interested.
 

·
Tgf Og
Joined
·
9,851 Posts
spree check with champ91 he made some for Jeff w/ a J and jeff so kindly crash tested them and they flat work, no plastic damage what so ever.:helmet
 

·
Registered
Joined
·
1,560 Posts
Yeah, maybe Pete can hook us all up with a pair. I need new ones because I did crash test mine:D


Doc
 

·
Registered
Joined
·
29 Posts
Discussion Starter · #5 ·
homemade sliders...

jim - last i spoke to champ91/pete, he needed to know the dimensions of the frame sliders for the R6. since i don't currently own a pair of them, i didn't have a clue what info to give him.

he was nice enough to offer to make them, as long as i had dimensions.

doc - are your sliders trashed that bad? if you're going to remove them i can take some measurements and pass them onto champ91.
 

·
Registered
Joined
·
1,560 Posts
I will try to get the proper dimensions and post them. I might not be able to use the barend sliders. So, they might be for sale ;) Also, I wouldn't recommend the swingarm sliders. I had them and they stick out quite a bit. I was worried that they would touch down in a turn and possible unsettle the rear. When I went down on Sat., the swingarm never even touched. Although, if you go down on the left side, it probably would. It's your call, but I don't have them any more.


Doc
 

·
Tgf Og
Joined
·
9,851 Posts
Spree im pretty sure he has them now because jeff had him on his bike for this weekend.
 

·
No more street...
Joined
·
356 Posts
Champs' sliders are THE GOODS....saved me big$$$$$$

Lupi took a few pic's, maybe he could post 'em.

Champ should be all set to take your orders!
 

·
IDK WTF TO PUT HERE NOW!
Joined
·
2,765 Posts
Jeff with a J said:
Champs' sliders are THE GOODS....saved me big$$$$$$

Lupi took a few pic's, maybe he could post 'em.

Champ should be all set to take your orders!
Yup, Champ should be able to make them now. He has all the dimensions and info he needs, thanks to Mr. Jeff.

I took the pics on Pete's digi so he'll have to get them posted. I know he pretty much went to bed last night (damn I didn't get home till 11 after taking the camper back north) so maybe he can post pics tonight!

Ciao,
Lupi
 

·
Who's faster Lupi
Joined
·
4,957 Posts
OK OK I can take a hint. Jeff w/ a J has/had a pair on his R6. He was so kind to test their durability. Thanks Bro. They did exactly what they were supposed to do. DJS also has a pair now for his R6. Kruz and Lupi have a pair each on their F4's. Like wise, Kruz decided to test 'em out too. Thanks to you as well bud. Vcook has a pair for his GSXR 600. Ya dont need to test 'em Chris I know they work.:D

So the list of supported bikes is

GSXR 600 / 750 / 1000
F4/F4i
ZX9R ('94-'97) Sorry Ody, Jim, Jeff
R6
ZRX 1100 / 1200

Send me a PM if interested.

I have post crash pics of Jeff's R6 I will be posting here tonight.
 

·
Who's faster Lupi
Joined
·
4,957 Posts
post crash on the R6.
 

·
BEER!
Joined
·
5,970 Posts
When you adding the SVs? :D I read on SBN that they tend to save the bodywork, especially on low speed cornering 'boo-boos'.
No, I don't plan on testing them.

Chris

Champ91 said:
OK OK I can take a hint. Jeff w/ a J has/had a pair on his R6. He was so kind to test their durability. Thanks Bro. They did exactly what they were supposed to do. DJS also has a pair now for his R6. Kruz and Lupi have a pair each on their F4's. Like wise, Kruz decided to test 'em out too. Thanks to you as well bud. Vcook has a pair for his GSXR 600. Ya dont need to test 'em Chris I know they work.:D

So the list of supported bikes is

GSXR 600 / 750 / 1000
F4/F4i
ZX9R ('94-'97) Sorry Ody, Jim, Jeff
R6
ZRX 1100 / 1200

Send me a PM if interested.

I have post crash pics of Jeff's R6 I will be posting here tonight.
 

·
Who's faster Lupi
Joined
·
4,957 Posts
I have yours and the bolts ready. Just need to test fit.
 

·
Man with Big Hose
Joined
·
1,432 Posts
So the list of supported bikes is

GSXR 600 / 750 / 1000
F4/F4i
ZX9R ('94-'97) Sorry Ody, Jim, Jeff
R6
ZRX 1100 / 1200

Send me a PM if interested.
Hey what about the YZF 600?:mad

Thanx for remembering...you JUST did them!!!!!!!!!!!!!!:jester
 

·
Man with Big Hose
Joined
·
1,432 Posts
another pic of Champs mad machining skillz!!!
 

·
Man with Big Hose
Joined
·
1,432 Posts
 

·
(no comment)
Joined
·
353 Posts
If you guys are looking for some premium frame sliders, check these out. They are called MOKOs and are made in Germany. I bought them for my R1 and they were about $160 shipped. The guy I bought them from was a great person to deal with, and I'd highly recommend him.

For those who question the integrity of the sliders, we've had a few guys crash them on the R1 board and they held up very well.

Here's some info in them:

http://www.bethman.net/r1forum/mokos.html
 

·
Man with Big Hose
Joined
·
1,432 Posts
$160 for sliders? (they must be made of GOLD and Diamonds) or $40 for ones that have proven to work. HMMMMMMMMMM............which would I buy?

I would hope they work well for THAT price!!!!!!!!
 

·
(no comment)
Joined
·
353 Posts
Nope, no gold or diamonds, just some delrin and billet aluminum bases designed so the bolts don't bend over or break off in the event of a hard impact. You have to see them in person to appreciate them, I guess. They aren't for everyone.

:p
 
1 - 20 of 21 Posts
Top